Available with wire lengths from 20m to 300 m - LV range
LV device consists of one support on which all is integrated. It is an “all in one” design. In the center of the reel, there are battery and management system On the drum of the reel is rolled the electroluminescent wire linear. Dimension of the reel is in accordance with the wire length. From 10m to 140m but up to 300m possible on request. Batteries are rechargeable and runtime depending of the cable linear and of the mode of using, continuous or blinking, is from 4 to 16 hours. As high mechanical characteristics, LV device and LVS devices are robust and strong enough for all types of operations including transportation and storage phases. Luminescent diode for charge and switch 3 positions for command. Charge by external fast charger on 90-240V AC and on request, on any 12V DC source. Implementation is by only one person and takes only few minutes. Process are in pulling on wire or in bringing the device itself and unroll.
2. LV DEVICE WITH PLASTIC-RUBBER REEL : LVN type Same design than LV above except:
3. LV DEVICE WITHOUT INTERNAL BATTERIES - BACK UP MODEL : -SB type LV-SB or LVN-SB types are for using exclusively out of aquatic environment. SB reference is proposed on each type LV and LVS. Internal batteries has been removed, only management system kept; no charger. That allows to use in plugging the whole on any external electrical source 12V DC ou 90-240V AC. In that model –SB, autonomy depends of availability of that external source so runtime quite unlimited. Interest of –SB reference: lighter, cheaper, unlimited runtime, no battery maintenance, immediately ready to be used.
4. OPTION FOR ALL TYPES: Marine protection ( IP66 -IP68 for LVN)
|
LVS type - ( below 100 LVN100 . This reel is for length up to 150m )
LV type ( below 100m so LV100 type)
|
|
|
LVS type - below 100 m . length up to 150m
|
Usage: the material is devised for use on land or in the water. On land, it can be used to identify and to mark intervention zones, or to indicate access and evacuation routes. In the water, the base and reel are not waterresistant and only the cable can be submerged. Light can be sent by flash mode to transmit instructions, to give a more attractive look for certain uses, or to increase autonomy. Maintenance: this equipment is designed for intensive use. It requires no particular care except for jet spraying with fresh water, which is indispensible after use in the sea (do not use high pressure). We recommend using a soft cloth or sponge to manually remove any grime remaining on the line after use in very dirty environments: mud, sludge, sediment, etc.
River crossing with adjustable discretion |
|
|
|
|
|
